Governing Equations of Incompressible MHD
Complete term-by-term derivation and physical explanation of the incompressible magnetohydrodynamic equations: continuity, Navier–Stokes with Lorentz force, pre-Maxwell electrodynamics, Ohm's law, the induction equation, boundary conditions, and energy conservation.
Incompressible magnetohydrodynamics (MHD) describes the coupled motion of an electrically conducting, constant-density fluid (such as a liquid metal, molten salt, or weakly compressible plasma) and a macroscopic magnetic field. It combines the Navier–Stokes equations of continuum fluid mechanics with pre-Maxwell electrodynamics.
1. Fundamental Assumptions (MHD Approximation)
Standard incompressible MHD rests on four continuum assumptions (Davidson, 2017; Moreau, 1990):
- Non-relativistic velocities: Characteristic flow speeds $U$ and phase speeds are much smaller than the speed of light ($U \ll c$, $L/\tau \ll c$).
- Pre-Maxwell electrodynamics: Because $U \ll c$ and the charge-relaxation timescale $\tau_e = \varepsilon_0/\sigma$ ($\sim 10^{-18}\text{ s}$ in liquid metals) is vastly shorter than any hydrodynamic timescale $\tau = L/U$, the displacement current $\varepsilon_0 \partial_t \mathbf{E}$ in Ampère’s law and free electrostatic forces $\rho_e \mathbf{E}$ in the momentum equation are negligible.
- Quasi-neutrality: Free charge density $\rho_e$ adjusts almost instantaneously so that $\nabla \cdot \mathbf{J} = 0$ holds to high accuracy, even though $\nabla \cdot \mathbf{E} = \rho_e / \varepsilon_0$ need not vanish.
- Incompressibility: Density $\rho$ is constant and uniform (valid for Mach numbers $\mathrm{Ma} \ll 1$ and negligible thermal expansion, or under the Boussinesq approximation for buoyancy).
2. Conservation of Mass (Incompressibility Constraint)
$$\nabla \cdot \mathbf{u} = 0$$- Meaning: The velocity field $\mathbf{u}(\mathbf{x}, t)$ is solenoidal (divergence-free). For a constant-density fluid, the rate of fluid volume entering any control volume equals the rate leaving it.
- Mathematical role: Acts as a kinematic constraint that determines the scalar hydrodynamic pressure $p(\mathbf{x}, t)$ instantaneously via a Poisson equation.
3. Conservation of Momentum (Navier–Stokes + Lorentz Force)
$$\rho \left(\frac{\partial \mathbf{u}}{\partial t} + (\mathbf{u} \cdot \nabla)\mathbf{u}\right) = -\nabla p + \rho \nu \nabla^2 \mathbf{u} + \mathbf{J} \times \mathbf{B} + \mathbf{f}_{\mathrm{ext}}$$Each term represents a force per unit volume ($\mathrm{N\,m^{-3}}$):
- $\rho\,\partial_t \mathbf{u}$: Local acceleration (rate of change of momentum at a fixed point).
- $\rho (\mathbf{u}\cdot\nabla)\mathbf{u}$: Convective inertia (nonlinear transport of momentum by the flow itself).
- $-\nabla p$: Isotropic pressure gradient (enforces $\nabla\cdot\mathbf{u}=0$).
- $\rho \nu \nabla^2 \mathbf{u}$: Viscous diffusion, where $\nu = \mu/\rho$ is the kinematic viscosity; damps velocity gradients at small scales and in boundary layers.
- $\mathbf{J} \times \mathbf{B}$: Volumetric Lorentz force, representing the macroscopic electromagnetic force exerted by the magnetic field $\mathbf{B}$ on the electric current density $\mathbf{J}$ flowing through the fluid.
- $\mathbf{f}_{\mathrm{ext}}$: Additional body forces such as gravity/buoyancy ($\rho' \mathbf{g}$) or the Coriolis force ($-2\rho\,\boldsymbol{\Omega}\times\mathbf{u}$ in rotating planetary cores).
Magnetic Pressure & Magnetic Tension Decomposition
$$\mathbf{J} \times \mathbf{B} = -\nabla\!\left(\frac{B^2}{2\mu_0}\right) + \frac{1}{\mu_0}(\mathbf{B} \cdot \nabla)\mathbf{B}$$- $-\nabla(B^2 / 2\mu_0)$ — Magnetic Pressure: Acts identically to a scalar fluid pressure $p_B = B^2/(2\mu_0)$, pushing fluid from regions of strong magnetic field toward regions of weak magnetic field. It can be absorbed into a modified total pressure $P = p + B^2/(2\mu_0)$.
- $\mu_0^{-1}(\mathbf{B} \cdot \nabla)\mathbf{B}$ — Magnetic Tension: Acts along curved magnetic field lines like tension in a stretched elastic string ($B^2/\mu_0$ per unit area), resisting bending and driving Alfvén waves. Notice that if $\mathbf{B}$ is straight and uniform along its own direction, $(\mathbf{B}\cdot\nabla)\mathbf{B} = 0$ and only magnetic pressure remains.
4. Pre-Maxwell Electrodynamics
Gauss’s Law for Magnetism (Solenoidal Field Constraint)
$$\nabla \cdot \mathbf{B} = 0$$- Meaning: Magnetic monopoles do not exist; magnetic field lines always form closed loops (or extend to infinity).
- Role in time evolution: Taking the divergence of Faraday’s law ($\partial_t(\nabla\cdot\mathbf{B}) = -\nabla\cdot(\nabla\times\mathbf{E}) \equiv 0$) guarantees that if $\nabla\cdot\mathbf{B} = 0$ initially, it remains zero for all time analytically (though numerical MHD schemes require divergence-free projections or constrained transport).
Pre-Maxwell Ampère’s Law
$$\nabla \times \mathbf{B} = \mu_0 \mathbf{J}$$- Meaning: Electric currents $\mathbf{J}$ are the sole source of curl in the magnetic field $\mathbf{B}$, where $\mu_0 = 4\pi \times 10^{-7}\text{ H\,m}^{-1}$ is the vacuum permeability.
- Consequence (Current Conservation): Taking the divergence immediately yields $\nabla \cdot \mathbf{J} = 0$, confirming that under the MHD approximation all electric currents must close in loops within the fluid or through conducting boundaries.
Faraday’s Law of Induction
$$\frac{\partial \mathbf{B}}{\partial t} = -\nabla \times \mathbf{E}$$- Meaning: A time-varying magnetic flux induces a rotational (non-conservative) electric field $\mathbf{E}$, coupling magnetic evolution back to the electric field.
5. Ohm’s Law for a Moving Conductor
$$\mathbf{J} = \sigma \left(\mathbf{E} + \mathbf{u} \times \mathbf{B}\right)$$- Meaning: In the laboratory frame, the electric field experienced by charge carriers moving with the fluid at velocity $\mathbf{u} \ll c$ is the Lorentz-transformed field $\mathbf{E}' = \mathbf{E} + \mathbf{u} \times \mathbf{B}$.
- Components:
- $\sigma \mathbf{E}$: Conduction current driven by electrostatic potential gradients ($-\nabla\phi$) or induced electromotive forces.
- $\sigma (\mathbf{u} \times \mathbf{B})$: Motional (dynamo) current generated by moving a conductor across magnetic field lines—the exact principle observed by Faraday (1832).
- (In low-density, strongly magnetized plasmas where the electron cyclotron frequency exceeds the collision frequency, Ohm’s law generalizes to include the Hall term $-\mathbf{J}\times\mathbf{B}/(n_e e)$ and electron pressure gradients.)
6. The Magnetic Induction Equation
$$\frac{\partial \mathbf{B}}{\partial t} = \nabla \times (\mathbf{u} \times \mathbf{B}) - \nabla \times \left(\frac{1}{\mu_0 \sigma}\nabla \times \mathbf{B}\right)$$$$\frac{\partial \mathbf{B}}{\partial t} = \nabla \times (\mathbf{u} \times \mathbf{B}) + \eta \nabla^2 \mathbf{B}, \qquad \eta = \frac{1}{\mu_0 \sigma}$$where $\eta$ is the magnetic diffusivity ($\mathrm{m^2\,s^{-1}}$).
- $\nabla \times (\mathbf{u} \times \mathbf{B})$ — Advection & Stretching: Using $\nabla\cdot\mathbf{u} = \nabla\cdot\mathbf{B} = 0$, this expands to $(\mathbf{B}\cdot\nabla)\mathbf{u} - (\mathbf{u}\cdot\nabla)\mathbf{B}$. The second term advects magnetic field lines with the flow, while $(\mathbf{B}\cdot\nabla)\mathbf{u}$ stretches and tilts field lines via velocity gradients—amplifying magnetic energy (the engine of dynamos).
- $\eta \nabla^2 \mathbf{B}$ — Ohmic Diffusion: Analogous to viscous diffusion of vorticity, finite resistivity causes magnetic field lines to diffuse across fluid elements and decay over the resistive timescale $\tau_\eta = L^2/\eta$, enabling magnetic reconnection.
- The ratio of advection to diffusion is the magnetic Reynolds number $\mathrm{Rm} = UL/\eta$.
7. Boundary Conditions
A well-posed incompressible MHD problem requires both hydrodynamic and electromagnetic boundary conditions on solid walls $\partial V$ with outward unit normal $\hat{\mathbf{n}}$ (Müller & Bühler, 2001):
- Velocity: Standard no-slip and impermeability conditions ($\mathbf{u} = \mathbf{u}_{\mathrm{wall}}$).
- Magnetic field & currents:
- Insulating wall ($\sigma_w = 0$): No normal current enters the wall ($\mathbf{J}\cdot\hat{\mathbf{n}} = 0$), and $\mathbf{B}$ matches continuously to a curl-free external potential field ($\mathbf{B} = \nabla\psi$).
- Perfectly conducting wall ($\sigma_w \to \infty$): Tangential electric field vanishes ($\mathbf{E}_\parallel = 0$) and the normal magnetic field is fixed ($\partial_t B_n = 0$).
- Thin conducting wall (Shercliff wall-conductance ratio $c_w = \sigma_w t_w / \sigma L$): Relates the normal current entering the wall to the tangential Laplacian of the wall potential: $J_n = c_w \sigma L \nabla_\parallel^2 \phi_w$.
8. Total Energy Balance & Joule Dissipation
$$\frac{\mathrm{d}}{\mathrm{d}t} \int_V \left(\frac{1}{2}\rho u^2 + \frac{B^2}{2\mu_0}\right)\mathrm{d}V = -\int_V \left(2\rho \nu S_{ij}S_{ij} + \frac{J^2}{\sigma}\right)\mathrm{d}V - \oint_{\partial V} \left(\frac{\mathbf{E}\times\mathbf{B}}{\mu_0} + p\mathbf{u} + \cdots\right)\cdot\mathrm{d}\mathbf{S}$$- The Lorentz-force work $\mathbf{u}\cdot(\mathbf{J}\times\mathbf{B})$ cancels identically between the kinetic and magnetic energy budgets, acting solely as a conservative energy-exchange channel between fluid motion and the magnetic field.
- Total mechanical plus magnetic energy is dissipated irreversibly by viscous heating ($2\rho\nu S_{ij}S_{ij}$, where $S_{ij}$ is the strain-rate tensor) and ohmic (Joule) dissipation ($\Phi_J = J^2/\sigma$), while electromagnetic energy enters or leaves the domain via the Poynting flux $(\mathbf{E}\times\mathbf{B})/\mu_0$.
References
- Davidson, P. A. (2017). Introduction to Magnetohydrodynamics (2nd ed.). Cambridge University Press. doi:10.1017/9781316672853
- Moreau, R. (1990). Magnetohydrodynamics. Kluwer Academic Publishers. doi:10.1007/978-94-015-7883-7
- Shercliff, J. A. (1965). A Textbook of Magnetohydrodynamics. Pergamon Press, Oxford.
- Müller, U. & Bühler, L. (2001). Magnetofluiddynamics in Channels and Containers. Springer-Verlag. doi:10.1007/978-3-662-04405-6