Knowledge Base /Popular Topics & Applications

MHD (Electromagnetic) Pumps

Hermetically sealed, zero-moving-part pumping for liquid sodium, lead-bismuth, and molten aluminium—comparing DC conduction pumps and AC Annular Linear Induction Pumps (ALIP).

Pumping White-Hot Liquid Metal Without Seals or Bearings

How do you pump liquid sodium at 550 °C through a fast nuclear reactor, or circulate molten zinc and aluminium inside a die-casting furnace? A conventional mechanical centrifugal pump needs a spinning shaft passing through seals, lubricated bearings, and impellers—all of which corrode, seize, or risk catastrophic leaks when handling pyrophoric alkali metals or 700 °C alloys.

Electromagnetic (MHD) pumps eliminate every moving part. The liquid metal flows inside a completely sealed stainless-steel or ceramic pipe. Magnetic coils wrapped around the outside—or electrodes brazed to the pipe wall—apply a Lorentz body force $\mathbf{F}_L = \mathbf{J} \times \mathbf{B}$ directly to the liquid metal, pushing it smoothly along the pipe with zero shaft seals, zero mechanical wear, and instant electronic flow control.


Conduction vs. Induction: Which Pump Fits Which Job?

MHD pumps fall into two broad families:

  1. Conduction Pumps (DC or AC): Direct electrical current is fed through copper busbars into electrodes welded to the duct walls, crossing a static magnet’s field. They are compact and excel at low-flow, high-pressure duties or high-temperature auxiliary loops (e.g., space nuclear reactors, GaInSn laboratory loops), but require heavy kA, low-voltage ($< 5\;\text{V}$) busbars.
  2. Induction Pumps (ALIP, FLIP, Helical): A three-phase AC stator—essentially an “unrolled” induction motor wrapped around a pipe—creates a travelling magnetic wave moving at synchronous speed $v_s = 2 \tau f$ (pole pitch $\tau$, frequency $f$). The wave induces azimuthal eddy currents $J_\theta$ inside the liquid metal, which drag the fluid along behind the wave ($u < v_s$). Because they are completely electrodeless, Annular Linear Induction Pumps (ALIPs) are the workhorse for secondary and auxiliary loops in Sodium-Cooled Fast Reactors (SFRs) and fusion blanket test facilities (see AC Magnetic Fields: Stirring, Induction Pumping & Levitation for the underlying skin-depth and time-averaged Lorentz-force equations).

Professional Deep Dive: Slip, Efficiency & High-$Rm$ Instability

1. ALIP Pressure Rise & Slip

In an Annular Linear Induction Pump with mean radius $R$, annular gap $h \ll R$, active length $L$, and peak radial magnetic field $B_0$ travelling axially at synchronous velocity $v_s = 2\tau f$, the fluid moves at mean velocity $u = v_s (1 - s)$, where $s = (v_s - u)/v_s$ is the slip.

In the low-magnetic-Reynolds-number limit ($Rm_s = \mu_0 \sigma (v_s - u) \tau / \pi \ll 1$), the induced azimuthal current is $J_\theta \approx \sigma (v_s - u) B_r$, giving a time-averaged axial Lorentz force density and developed pressure head:

$$\Delta p_{\text{MHD}} \approx \frac{1}{2} \sigma B_0^2 v_s s L \cdot k_{\text{att}}$$

where $k_{\text{att}} < 1$ accounts for finite-length end effects and eddy-current losses in the stainless-steel duct walls. Ideal hydraulic efficiency (neglecting wall losses and stator $I^2 R$ heating) is $\eta_{\text{hyd}} = 1 - s$, while real multi-hundred-kilowatt SFR ALIPs typically achieve $\eta_{\text{tot}} \approx 35\text{--}50\%$ at $s \approx 0.2\text{--}0.4$.

2. The Gailitis–Lielausis Instability ($Rm_s > 1$)

When ALIPs are scaled up to large volumetric flow rates (e.g., primary fast-reactor coolant pumps with $Q > 1000\;\text{m}^3/\text{h}$), the slip magnetic Reynolds number $Rm_s = \mu_0 \sigma s v_s \tau / \pi$ exceeds unity. At $Rm_s > 1$, the fluid’s own induced currents significantly distort and screen the applied travelling magnetic field, producing a non-monotonic pressure–flow ($p\text{--}Q$) curve with a negative-slope unstable branch.

As first analyzed by Gailitis & Lielausis (1976), this triggers an azimuthal flow instability: the velocity around the annulus breaks symmetry—speeding up on one side and stalling or even reversing on the opposite side—causing severe pressure pulsations, low-frequency vibration, and thermal fatigue. Mitigating this instability via azimuthal baffles, graded pole pitches, or dual-stator phase control remains a central research topic in large-scale liquid-metal pumping.


Key Milestones & Literature Review

  • Discovery of the High-$Rm$ Instability (1976): Agris Gailitis and Olgerts Lielausis (1976) at the Institute of Physics in Salaspils (Riga) discovered and analytically explained the azimuthal flow-reversal instability in large induction MHD machines when $Rm_s > 1$, resolving a major barrier to scaling nuclear reactor pumps.
  • Engineering & Hydraulic Design Theory (2014–2017): I. V. Vitkovsky (2014) systematized the electromagnetic, thermal, and hydraulic design of DC/AC conduction and induction pumps for liquid metals, alongside P. A. Davidson’s (2017) treatment of Hartmann-channel conduction pumping.
  • Fast-Reactor Industrial Qualification (2015): I. R. Kirillov, D. M. Obukhov, and D. A. Pertsev (2015) documented decades of full-scale ALIP and cylindrical linear induction pump qualification for BN-series sodium-cooled fast reactors, demonstrating tens of thousands of hours of seal-free operation.

References

  1. Gailitis, A., & Lielausis, O. (1976). Instability of homogeneous velocity distribution in an induction-type MHD machine. Magnetohydrodynamics, 12(1), 69–79.
  2. Kirillov, I. R., Obukhov, D. M., & Pertsev, D. A. (2015). Electromagnetic pumps for fast nuclear reactors. Magnetohydrodynamics, 51(3), 473–484.
  3. Davidson, P. A. (2017). Introduction to Magnetohydrodynamics (2nd ed.). Cambridge University Press. https://doi.org/10.1017/9781316672853
  4. Vitkovsky, I. V. (2014). Magnetohydrodynamic Pumps for Liquid Metals. Wiley-VCH.